 |
| Quantity: | |
|---|---|
The JM-07 Double-End Tinning Machine represents a significant leap in automated wire processing, meticulously engineered to optimize both operational footprint and energy efficiency. By eliminating the need for a traditional external wire feeder, this compact unit effectively halves gas consumption, offering an exceptional performance-to-price ratio for high-volume manufacturing environments. At its core, the machine utilizes advanced imported servo motors to guarantee precise automatic positioning at both ends of the wire. This is complemented by a powerful double-drive wire feeding mechanism that ensures relentless mechanical productivity and long-term reliability. Capable of simultaneous peeling and pressing at both ends, the JM-07 achieves an impressive production rate of up to 5200pcs/H for the shortest tangent lengths. Operators will immediately notice the tactile responsiveness of the control panel and the quiet, rhythmic hum of the servo drives, which underscore its industrial-grade build. Whether you are scaling up production lines or seeking to reduce overhead costs, this equipment delivers a streamlined, high-yield solution without compromising on the meticulous accuracy required for modern electrical components.
• Features a fully closed-loop flexible wire feeding system with a rubber belt mechanism to protect the wire surface and enhance feeding accuracy. This material protection mechanism prevents mechanical scoring or crushing during rapid transit, ensuring that the delicate surface of your cables remains completely pristine while meeting strict tolerance requirements.
• Incorporates a network-driven system to meet the rigorous industrial processing demands of photovoltaic wires. Built to handle the heavy-duty processing demands of the renewable energy sector, this integrated system provides unparalleled synchronization, ensuring that complex industrial requirements are met with consistent, repeatable precision across thousands of cycles.
• Utilizes imported servo motor drives to ensure high precision, efficiency, and operational stability. Precision is non-negotiable in high-speed wire processing. These premium motors provide the exact torque and speed control necessary to maintain the 5200pcs/H output without causing excessive wear and tear on internal moving components.
• Runs on an industrial-grade computer operating system, offering a user-friendly and intuitive interface. The visual display is crisp and high-contrast, allowing operators to monitor production metrics at a glance. The logical menu layout reduces the learning curve, enabling faster onboarding for floor technicians.
• Supports both manual and automatic debugging modes, making equipment setup faster and more efficient. Time spent on equipment setup is time lost in production. This dual-mode functionality grants operators the flexibility to fine-tune specific parameters manually or rely on automated sequences for standard runs, drastically reducing line changeover times.
• Equipped with a servo-driven crimping system that maintains a stable compression ratio, fully meeting cross-sectional analysis standards. Maintaining a stable compression ratio is critical for electrical conductivity and mechanical strength. Every crimp is executed with a satisfying, precise mechanical lock that guarantees long-term connection integrity.
• Continuous operation requires foolproof safety mechanisms to protect both the machinery and the operators. The JM-07 continuously inspects equipment status, actively detecting abnormalities such as low air pressure. In the event of an irregularity, the system triggers an immediate shutdown protocol, preventing material waste and potential hardware damage.
Model | JM-07 |
Speed | 5200pcs/H(Shortest Tangent |
Applicable wire | AWG1007 16#~30# |
Cutting length | The shortest length of 20mm~9999mm depends on the stripping length |
Cutting precision | ±0.1mm(design 0.005x total length) |
Stripping length | 1 side 10mm 2 side 10mm |
Crimping force | 19600N(2T) |
Control method | Single chip microcomputer control |
Inspect equipment | Detect abnormalities such as low pressure and shutdown |
Voltage | 220V |
Air supply | 0.5Mpa(5kgf/cm)~200NL/Min |
Size And Weight | 1140Wx670Dx1400H(mm)450kg |
Tips: Understanding your specific production requirements is essential for optimizing this equipment's output. The machine capacity is only theoretical data, the actual capacity is related to the size of the wire and the size of the terminal, depending on the actual capacity. Proper calibration, along with the right selection of tooling, will help facility managers achieve the highest possible daily yield while maintaining strict quality control. (The right of interpretation belongs to Nissei Electro-Mechanics)
The versatility of the JM-07 extends far beyond standard wire stripping and tinning. Thanks to its compact volume and drastically reduced gas consumption, it is an ideal addition to crowded factory floors where space and energy efficiency are paramount. The machine excels in producing harnesses for the automotive sector, where cross-sectional analysis standards dictate zero margin for error. Furthermore, its specialized capability to handle photovoltaic wires makes it a critical asset for manufacturers supplying the solar and renewable energy markets. The integration of advanced servo positioning and double-drive feeding means that even complex, multi-strand wires are processed with absolute uniformity. By bridging the gap between high-speed mechanical output and delicate material handling, this equipment serves as a cornerstone for any facility focused on scaling their electrical component manufacturing capabilities.
